Beta

Try Leta during the beta

Leta is in beta. Builds go out to testers by email while the first public release is prepared. Ask, and you’ll get the installer and a license for the beta.

Leta 0.6.0Beta
Released
September 26, 2026
Installer
19.3 MB
Portable zip
21.3 MB
Needs
64-bit Windows 10 or 11

Or write to support@letacad.com. Say what you design and what you use now.

What testers get

  • The installer, or a portable zip that runs from any folder
  • Every feature, with nothing held back
  • New builds as they’re ready, each with its release notes shown on first start
  • File > Report a Problem, which writes a report you can read before you send it

Found something wrong? The report holds the build, the computer and the last things Leta did. Nothing leaves your computer unless you send it.

System requirements

What Leta needs

Operating system64-bit Windows 10 or Windows 11
GraphicsA graphics driver with OpenGL 3.3. Any current Intel, AMD or NVIDIA driver has it.
DiskAbout 55 MB
Display1366 × 768 or larger. The ribbon regroups itself on smaller screens.
InternetOnce, to start the 30-day evaluation, or start it here from any computer. Never to install Leta, activate a license or use it.
Administrator rightsNot needed. Leta installs just for you; run the installer as an administrator to install it for everyone on the computer.

Installing

Run the installer normally and Leta installs for you alone, in your own folder, with no administrator prompt. Run it as an administrator and it installs for everybody who uses the computer. The portable zip is the same files with nothing registered: unpack it anywhere and run leta.exe.

Leta isn’t code-signed yet, so Windows SmartScreen may warn the first time you run the installer. Choose More info, then Run anyway.

For IT: a silent install

Leta-Setup-0.6.0.exe /S /D=C:\Program Files\Leta, with /NOSHORTCUTS and /NOASSOC if you want them. Uninstalling removes only what the installer put there, never a part someone saved.

Built on open source

Leta’s geometry kernel is Open CASCADE Technology 7.9.3, used unmodified under the GNU Lesser General Public License 2.1 with the Open CASCADE exception. Its interface is drawn with Dear ImGui (MIT license). The license texts ship with every release.

Read the third-party notices

Questions before you try it?

Write to support@letacad.com. You’ll hear back from the person who builds Leta.